Liquid Meters

Home


Gauges	Gas Meters	Gas Regulators

Cold and Hot Water Meters, Oil Meters, Chemical Meters, Waste Water Meters
Sanitary Meters, Petroleum Meters, and other chemical meters. Please call
for application recommendations. We offer a wide variety of liquid flow meter measurement options.

Honeywell

Cold Water (Click panels of view products)

Model V100

V100 meters can also be ordered with pulse output. The V100 is a compact, lightweight positive displacement meter of a piston design in sizes 1/2" in polymer and 1/2", 5/8"x3/4". Meters are low cost and operate ±1%. V100 is for services up to 120°F and 150 psi. the V100 is appropriate for applications with water conditioning and purification

PDF: brochure

Model H4000

A horizontal Woltmann-type meter designed for installation where occasional low and moderate to hight sustaned flows are demanded. Accuracy is maintained in both forward and reverse flow directions. Meter is for use with POTABLE COLD WATER.

PDF: brochure

Hot Water Meters

Model M190
Sizes 1/2", 3/4", 1" & 1-1/2"

The M190 how water meter is a multi-jet inferential meter designed for batch or continous process monitoring of hot water up to 266°F in services up to 230 psi

PDF: brochure

Model H4400
Sizes: 2" 3" 4"

Model H4400 can be installed in services where water temperature can reach 350°F and pressures up to 195 psi (250°F at 230 psi). This meter offers improved low flow performance (±2%). Two externally powered pulser models are available for the H4400 (reed switch for low speed pulse and inductive for high resolution pulse)

PDF: brochure

Electromagnetic Meter

Model evoQ4
Sizes: 2" 3" 4" 6" 8"

The evoQ4 is a battery powered eletromagnetic water meter that is suitable for a wide range of metering applications. No moving parts so regulator maintenance is not required. designed to work in both potable cold water and wastwater applications.

PDF: EVOQ4 brochure
STD: EVOQ4 STD 2"-12"
LOW FLOW: EVOQ4 LF 1.5" - 2"

Oil Meter

Industrial Oil Meter
Sizes: 1/8", 1/4", 1/2", 3/4", 1", 1-1/2", 2"

For oil measurement of light, medium and even heavy heating oil and diesel oil, Elster offers oil meters covering flows from 1/4 gph to 8000 gph with accuracy ±1%.

PDF: brochure 1/8"-1/4", 1/2"-1", 1-1/2"-2"

Electronic and Accessories

	R420 Flow Indicator Designed to operate with any Elster meter with pulse. The R420 provides rate indications, totalization and 4-20mA DC analog output signal proportional to the flow rate. PDF: brochure
	Electronic Batch Controller The EBC2C is an AC powered totalizer, rate indicator and batch congtroller. It has both single relay output to a standard solenoid and dual relayoutput for use with dual valve batch control systems, dual stage solenoids, or bi-directional solenoids with auxilliary limit switchers. PDF: brochure
	R10 Rate Indicator / Totalizer Model R10 is an economical up-counting totalizer and a 1/Tau ratemeter. The ratemeter/totalizer has 8 digit LCD display. seperately programmable count/rate scallers and decimal points allow for display of rater and count in various engineering units. Shows either rate or total by pressing the T/R mode select button. PDF: brochure
	T210 Electronic Outreader The T210 electronic outreader is designed specifically for accurate counting of water meter pulse outputs. It incorporates an easy to read display. Using a wired connection, the T210 accumulates pulses fromthe water meter and stores the reading. PDF: brochure
	evoQ4 Remote Display he evoQ4 remote display is designed to give the customer the ability to display the actual reading from the meter to a more easily accessible location. The remote display is battery operated and reads the evoQ4 optically displaying the volume and flow in real time. PDF: brochure
	evoQ4 Pulse Output Module The evoQ4 pulse module provides a reliable output communication for connection to all common data management devices, including data-loggers, AMR/I and SCADA systems. The pulse unit is self powered using its own batteries and does not affect the meter life. PDF: brochure

Norgas

	SingleMag-Poly The SingleMag™ Polymer Water Meters are the ONLY water meters approved by National Conference of Weights and Measures (NTEP) and NIST Handbook 44. PDF: SingleMag-Poly
	VersaMag-Poly The Versamag is the most versatile multijet type water for submetering applications The Versamag is capable of beine installed in both horizontal and vertical positions while adhering to AWWA c708 accuracies PDF: VersaMag-Poly
	MultiMag The MultiMag series water meters utilize multijet principles for accurate water measurement and are known for their simplicity, longevity and accuracy. (3/4", 1", 1-1/2", 2") PDF: MultiMag
	TM Series The TM Series Turbine Meter is a horizontal Woltman-type with a long life design suited for low flows and moderate to high flows of potable water. A rugged resign allows for the TM Series to be installed in a variety of industrial environments. (2", 3", 4", 6", 8", 10") PDF: TM

Tuthill

	TM Series Sizes: 1/4", 3/8", 1/2", 3/4" Mini flow meters with flow rates to 0.03 gpm or less. Provide accurate records in additive injection, fuel consumption, jug filling and many other low flow systems PDF: TM02D, TM03A, TM04A, TM06A
	TN Series Sizes: 1", 1-1/2" With inventory control accuracy, these meter are available for transfer, blending, batching & dispensing service. Meters can be assembled with either mechanical & electronic register. PDF: brochure
	TS Custody Transfer Certified Series Sizes: 1", 1-1/2", 2", 3" TS Series flow meters are approved by NTEP (formerly NIST) for Weights & Measures service in the US. Selected models are approved by similar authorities in Australia, Canada and teh EEC. PDF: TS10A, TS15A, TS20A, TS30A (available in stainless steel)
	TS Industrial Series Sizes: 1", 1-1/2", 2", 3" Industrial flow meters are available with either mechanical or electronic registers, and can be assembled to suit the most demanding operational requirments. Electronic assemblies are gland-less, and can have the display either mounted or remote. PDF: TS10A, TS15A, TS20A, TS30A (available in stainless steel)

Accessories
	Electronic Large Numerical Counter (ELNC) Featuring 6 digits of reset total and 8 digits of non-reset total, the ELNC is a battery powered indicator capable of accepting DC pulse and switch closure inputs. It is also field programmable and can be used with all FPP meters. Programmable in gallons, liters, barrelad and most other engineering units. PDF: brochure
	Battery Powered Scaling Counter CC56 economical electronic register is available in either NEMA 4X or NEMA 7/4 enclosures (or NEMA 3R, TM series meters only). Other registers with higher levels of functionality are available PDF: CC56
	Signal Conditioners Tuthill currently offer three signal conditioners that will assist you with scaling, and amplifying, linearizing, splitting, asolating and vonverting your signals to analog PDF: PAC, PIA, SCL
	Batching Systems Batching function is available both in mechanical and electronic flow meter assemblies. the mechanical version is available in TS series only. The electronic version can be combined with the TM, TS or TN series meters. PDF: PDB180, PDB 480, EMR3
	Pulsers TM & TS series meters are available with a choice of 3 different pulsers. Hall Effect (single channel) is standard, and requires external DC power Reed Switch (single channel) is optional, used only when battery powered registers Hall Effect (dual channel = Quadrature) is optional for use with higher level electronics
	Control Valves For use with mechanical preset counters, we offer mechanical piston valves with a linkage to attach to the preset. For use with electronic registers & batch controllers we offer several different types of solenoid valves.
	Air Elimination FPP Air Eliminators function on a gravity principle, and are normally installed on top of the FPP Strainer. In systems with little or no back pressure, either a back pressure valve or an air check valve may be required to enhance the efficiency of the air eliminator. On higher viscosity liquids such as diesel fuel, the air may not have enough time to rise during passage of a standard strainer. For use on higher viscosity liquids, a high capacity strainer with greater holding capacity is available. Please consult with your distributor to determine whether a high capacity strainer is required. For LPG service, a vapor eliminator with pressure relief valve is used, in conjunction with a differential pressure check valve on flow meter outlet.
	Strainers To ensure error and damage free operation of your flow meter, it is recommended that a strainer be installed "upstream" to avoid ingestion of particulates. PDF:

RCM - FLO GAGE

RCM DIFFERENTIAL LIQUID METER
	Available Series: 7000 (thread) 8000 (wafer)	Capacities (minimum 10 psig operating pressure) 2 GPM to 3000 GPM PDF: RCM Brochure

Liquid Meters

Honeywell

Norgas

Tuthill

Accessories

RCM - FLO GAGE

RCM DIFFERENTIAL LIQUID METER